Novamem MBR membranesupplier page
About Novamem MBR membrane
Patented PES membrane by Novamem for waste water treatment:
- Completely fluorine free membrane (no PTFE, no PVDF, no PFAS, no PFOA)
- Only MBR membrane produced from biodegradable solvents
- Super hydrophilic
- Flow rate > 1,000 LMH
- Low fouling thanks to smooth surface and hydrophilicity
- Low operational costs
- Exceptional stability against high chlorine levels (tested to >1.000.000 ppmh)
Our new MBR membrane is a high performance, high strength PET nonwoven supported super hydrophilic PES membrane. The membrane excels with high flow rate, high stability in chlorine and unrivalled re-wettability (drying stable over hundreds of cycles). The membrane is in development status ready for testing in your modules.
Unit | Value | |
Color | Off-white | |
Thickness | µm | 100 |
Mechanical backbone | PET non-woven | |
Flow rate | l/m2/h/bar | 1000 |
Nominal pore size | nm | 75 |
kDA | 500 | |
Chlorine tolerance | ppmh | >1’000’000 |
Company summary
About this page
This page was last updated on 12 January 2024
Disclaimer
Information on this page may have been supplied by third parties. You are reminded to contact any third parties to confirm information is accurate, up to date and complete before acting upon it. TheMBRSite.com accepts no liability for information provided by third parties, actions taken on the basis of this information or information held on third-party websites.