HyperFlux tubular modulessupplier page
Module product series:
- HyperFlux I5, HyperFlux I5 LE, HyperFlux I5 CR
- HyperFlux I8, HyperFlux I8 LE, HyperFlux I8 CR
- HyperFlux I12.7
About HyperFlux tubular modules
Berghof UF tubular membrane modules
With Berghof Membranes ultrafiltration membrane modules, compact and economical filtration equipment can be built for any filtration capacity. Inside-out crossflow filtration enables operators to maintain higher flux rates while preventing from fouling and clogging. The module housings are manufactured from high quality materials and are delivered in various sizes with standard connections.
- Module membrane area: 0.012 up to 71m2
- Module length: 1,500 − 4,000 mm
- Module diameter: 3”, 4”, 6”, 8”, 10''
The tubular UF Hyperflux membranes from Berghof Membranes are made from low-fouling PVDF, PES and chemical-resistant polymers cast onto dual support layers. They are available in 3 different diameters (5, 8, 12.7 mm) and in following membrane configurations: Standard, backwashable and chemical resistant.
- High flux rates and output
- High quality permeate
- Fouling-resistant membranes
- Modular, low-footprint systems
- Easy maintenance with minimal downtime
- Long membrane lifetime
Module product series:
- HyperFlux I5, HyperFlux I5 LE, HyperFlux I5 CR
- HyperFlux I8, HyperFlux I8 LE, HyperFlux I8 CR
- HyperFlux I12.7
Company summary
About this page
This page was last updated on 30 January 2026
Disclaimer
Information on this page may have been supplied by third parties. You are reminded to contact any third parties to confirm information is accurate, up to date and complete before acting upon it. TheMBRSite.com accepts no liability for information provided by third parties, actions taken on the basis of this information or information held on third-party websites.