Dynatec HiBrid MBRsupplier page
Supplied by:
Dynatec Systems, Inc.
Multitube/Multichannel (MT/MC) MBR membrane configuration |
Polymeric membrane material
About Dynatec HiBrid MBR
Dynatec Systems’ HiBrid MBR offers the following benefits:
- ability to operate at lower recirculation rate to reduce power and match permeate flow to the system demand
- the HiBrid out-of-basin MBR concept combined with the ability to operate at both reduced and high cross-flow rates results in a system that has good sustainable flux rates with minimal cleaning maintenance required
- Dynatec’s control philosophy brings all system control and monitoring requirements to a central point and allows the complete system to be controlled with minimal operator input
- ability to control recirculation rates helps maintain stable flux and low rates of fouling.
Multitube/Multichannel (MT/MC) MBR membrane configuration
Polymeric membrane material
Company summary
Head office in Burlington, NJ, USA
Operates in
Worldwide
700+ commissioned plants
About this page
This page was last updated on 27 February 2020
Disclaimer
Information on this page may have been supplied by third parties. You are reminded to contact any third parties to confirm information is accurate, up to date and complete before acting upon it. TheMBRSite.com accepts no liability for information provided by third parties, actions taken on the basis of this information or information held on third-party websites.