Your web browser is out of date.

Update your browser for better security, speed and to get the best experience on this website.

Update your browser

Imemflo F-MBRsupplier page

Img products imemflo fs1
Supplied by: Imemflo
Flat Sheet (FS) MBR membrane configuration | Polymeric membrane material

Module product series:

  • FMBR-80 & 160

About Imemflo F-MBR

Imemflo flat sheet membrane is made of PVDF, which has better chemical stability, fouling resistance and mechanical strength. With advanced membrane fabrication technology, imemflo the membrane pore size around 0.1 um to get a higher water flux and water quality. The mortise and tenon structure is used in the support plate to get a more stable spacing without side panels. The support plate can be installed from top and installed from one side without the limits of the construction site conditions. Laser engraving diamond flow path, coupled with special umbrella support structure, make the suction pressure distribution much better without diverting nonwoven fabrics. This structure reduces the risk of fouling and improves the water flow rate.

Flat Sheet (FS) MBR membrane configuration
Polymeric membrane material | PVDF
Pore size: 0.01

Module product series:

  • FMBR-80 & 160

MBR Case studies and specifications

Company summary

Head office in Gujarat, India
Operates in Asia
15 commissioned plants | Total installed capacity of 1 MLD

About this page

This page was last updated on 05 May 2022


Information on this page may have been supplied by third parties. You are reminded to contact any third parties to confirm information is accurate, up to date and complete before acting upon it. accepts no liability for information provided by third parties, actions taken on the basis of this information or information held on third-party websites.