HyMem tubular membrane supplier page

Berghof Membranes tubular membrane
Supplied by: Berghof Membranes
Multitube/Multichannel (MT/MC) MBR membrane configuration | Polymeric membrane material

Module product series:

  • HyMem I5
  • HyMem I5 LE
  • HyMem I8
  • HyMem I8 LE

About HyMem tubular membrane

Make use of the advantages offered by HyMem tubular membranes:

  • Separation of media with high solids content
  • High pressure resistance
  • High thermal resistance
  • High chemical resistance
  • Sharp cut-offs.

The description means the inner diameter of the tubular membranes, measured in millimeters. e. g. I5 = tubular membrane with an inner diameter of 5 mm, and inner diameter of 8 mm for I8.

  • Module membrane area: 4,1 m2 − 67,2 m2
  • Module length: 1,500 − 4,000 mm
  • Module diameter3”, 4”, 6”, 8”, 10”

Read about Berghof Membranes' tubular membranes on their company website

Multitube/Multichannel (MT/MC) MBR membrane configuration
Polymeric membrane material | ( MBR / AnMBR / Crossflow) − PVDF, PES
Pore size: 5kD, 15 kD, 50 kD, 100 kD, 30 nm MWCO in kDa

Module product series:

  • HyMem I5
  • HyMem I5 LE
  • HyMem I8
  • HyMem I8 LE

Company summary

Head office in Eningen, Germany and Leeuwarden, The Netherlands
Operates in Africa, Americas, Asia, Europe and Middle East | Operates worldwide
Over 1,200 commissioned plants

Last updated: 19 June 2018

Disclaimer:

Information on this page has been supplied by third parties. You are reminded to contact the third party concerned to confirm information is accurate, up to date and complete before acting upon it.