Memstar supplier website

Logo Memstar
Based in Singapore | Conroe, Texas, USA
Offers Hollow Fibre (HF) MBR membrane configuration

Proprietary MBR products and systems:

  • Submerged MBR modules (SMM-1015T, SMM-1522T, and SMM-2030T)
  • Submerged MBR skids capable of treating up to 300 gpm (1,625 m3/day)
  • Replacement MBR products for any competitor

About Memstar

Memstar, a CITIC Envirotech Group Company, is a global leader in research, manufacturing, and application development of polyvinylidene fluoride (PVDF) hollow fiber membrane technology. Our extensive know-how of PVDF hollow fiber technology and large scale advanced manufacturing provides the highest value to our partners.

Memstar pressurized and submerged technologies are currently used at over 400 sites world-wide to treat more than 6,000,000 m3/day (1.6 billion gallons/day) in both industrial and municipal water and wastewater applications. Memstar has four manufacturing facilities in Singapore, China and USA using state-of-the-art manufacturing processes. In addition, the Memstar Innovation Center, located in Singapore, conducts research and development and pilot testing for next generation technologies.

MBR technology & applications

Proprietary MBR products and systems:

  • Submerged MBR modules (SMM-1015T, SMM-1522T, and SMM-2030T)
  • Submerged MBR skids capable of treating up to 300 gpm (1,625 m3/day)
  • Replacement MBR products for any competitor

Market applications:

  • Industrial MBR
  • Municipal MBR

We are the world’s largest manufacturer of TIPS (Thermally Induced Phase Separation) PVDF membranes and are capable of manufacturing NIPS (non-solvent induced phase separation) PVDF membranes as well.

Memstar’s 3G-TIPS fiber has optimal mechanical strength, superior chemical resistance, and is treated to be permanently hydrophilic.

These characteristics give the products superior anti-fouling performance, the ability to chemically clean across the entire pH spectrum allowing the products to be applied in the most challenging applications, and the highest effective filtration area per unit volume which leads to reduction in membrane tank footprint and air scouring requirement.

The modules can be packaged into one of our many engineered skid designs. Our largest skids can process <300 gpm while requiring a very low footprint (~1/2 of our leading competitors) due to the double decker configuration. There are two patented aeration technologies which eliminate the need for backwashing and minimize energy consumption. These products have been tested and proven by end users, international membrane producers, and water treatment solution OEMs.

The net result is that our technology creates value and drives down the cost for customers through smaller overall system footprint, lower capital and O&M cost, lower energy consumption, and longer membrane life.

Company summary

Head office in Singapore | Conroe, Texas, USA
Operates in Worldwide
Offers Hollow Fibre (HF) MBR membrane configuration | Immersed technology configuration
>160 MBRs commissioned plants | Total installed capacity of > 4,500,000 m3/day

Supplementary services offered by Memstar:

  • Membrane system design support
  • Membrane system commissioning supervision
  • Plant operation optimization and troubleshooting

Last updated: 16 January 2019

Disclaimer:

Information on this page has been supplied by third parties. You are reminded to contact the third party concerned to confirm information is accurate, up to date and complete before acting upon it.