Your web browser is out of date.

Update your browser for better security, speed and to get the best experience on this website.

Update your browser
Advert

Zhejiang Pharmaceutical wastewater treatment plantview MegaVision Membrane

img_case_study_shanghai_megavision_zhejiang_pharmaceutical
Location: Zhejiang, China
Supplied by: Shanghai MegaVision Membrane Engineering and Technology Co., Ltd and Shanghai MegaVision / Antonio Ferreira (VALORSABIO)

Application:

Fine chemical and pharmaceutical

MBR technology/system:

Shanghai MegaVision Membrane Engineering and Technology Co., Ltd

Flat Sheet (FS) MBR membrane configuration | Immersed technology configuration
Membrane material: Polymeric
Capacity range (MLD): < 1.0

About Zhejiang Pharmaceutical wastewater treatment plant

Commissioned/installed date: 2011
Capacity range MLD: <0.5
Average daily flow: 0.4 MLD
Peak daily flow: 0.6 MLD

This project was designed after several months’ tests in situ for determination of the best options to implement the depuration of a very complex mix of industrial wastewater. The designed solution comprises the use of all concrete previous tanks all together with a new anaerobic treatment as Primary Treatment, based on VALORSABIO’s technology UASB-PRO, and a Secondary Treatment based also on VALORSABIO’s technology, the JET-LOOP SYSTEM + MBR.

In parallel to the Secondary Treatment based on biological processes (JET-LOOP SYSTEM + MBR) was also installed a Chemical and Physical unit, able to flocculate and remove non-biodegradable substances present in the effluents.

The UASB-PRO installed and in operation since November 2011, uses an new pulse process for the wastewater feed, solving the old problems found in large UASBs, related with unbalanced and bad distribution of feed, preferential paths of flow inside the bioreactors and difficulties in stabilising the up-flow wastewater within the design range.

The operation of the UASB-PRO is now capable to reduce the COD loads by more than 80%, even in the case with the presence of a poorly biologically degradable influent, and produces a considerable volume of biogas, thus reducing the treatment OPEX and creating a return as electrical energy and hot water from the biogas cogeneration burn.

As for the JET-LOOP SYSTEM + MBR, the process is operating with low HRT (less than 25%) in comparison with previous conventional activated sludge process and produces an extremely high quality treated water, fully under the legal permits negotiated with the authorities agencies.
Notes on technology used:

The designed solution comprises the use of all concrete previous tanks all together with a new anaerobic treatment as primary treatment, based on VALORSABIO’s technology UASB-PRO, and a secondary treatment based also on VALORSABIO’s technology, the JET-LOOP SYSTEM + MBR.

Company summary

Head office in Shanghai, China
Operates in Worldwide | Operates in Africa, Americas, South-East Asia, China, Europe and Middle East.

About this page

This page was last updated on 19 June 2018

Disclaimer

Information on this page may have been supplied by third parties. You are reminded to contact any third parties to confirm information is accurate, up to date and complete before acting upon it. TheMBRSite.com accepts no liability for information provided by third parties, actions taken on the basis of this information or information held on third-party websites.