Membrane bioreactors have been applied to treat effluent in a number of industrial sectors, including among others:
There is no significant difference in the design of the MBR technology for a process treating industrial rather than municipal wastewater.
The key differences between the two applications are that, for industrial effluents, there are:
- higher concentrations of organic matter, which also tend to be more biorefractory (i.e. less biodegradable) than in municipal effluent,
- more temporal variation in the concentrations of pollutants, both seasonally and diurnally (i.e. across a daily cycle) than for municipal effluent,
- very significant variations across the different industrial sectors, with the least biorefactory effluents from the food and beverage industry and the most biorefactory from landfill leachate applications,
- no requirement for the removal of pathogenic micro-organisms, unless the effluent is combined with a sewage stream. The significant variations in concentration usually demand equalisation of 8−24 hours to ensure that the biological process is not exposed to shock loads or organic matter. Pretreatment may also be necessary if the feed water contains significant amounts of free oil, which might otherwise irreversibly foul the membrane. Against this, screening (to remove coarse solids) is generally less important.
© Text copyright Judd & Judd Ltd
Contact email@example.com to remove or edit a comment.
Information on this page has been supplied by third parties. You are reminded to contact the third party concerned to confirm information is accurate, up to date and complete before acting upon it.