Your web browser is out of date.

Update your browser for better security, speed and to get the best experience on this website.

Update your browser

Koch Membrane Systems introduces next-generation PURON™ MBR solution at WEFTEC

Posted on

Koch Membrane Systems, Inc. will introduce its latest evolutionary PURON™ membrane bioreactor filtration modules at WEFTEC 2011, the 84th Annual Water Environment Federation Technical Exhibition and Conference, which takes place October 1519 in Los Angeles, USA.

Koch say that their new PURON PSH1800 MBR product offers superior solids management and reduced energy and life-cycle costs with a 10 per cent lower aeration requirement and a 10 per cent greater surface area than competitive products, and up to a 25 per cent capacity increase from previous PURON generations.

The new module leverages the PURON module’s central aeration and a single header design to offer 1800m2 in a 1.75m x 2.42m footprint, resulting in one of highest packing density, smallest footprint MBR modules available in the marketplace. In addition to the PSH1800, KMS is offering the PSH300 and PSH600, both compatible with other commercial MBR systems.

KMS will also introduce the high area PURON PSH2600 module, designed for tertiary wastewater treatment. Based on the same technology as the PURON MBR modules, the PURON PSH2600 submerged reinforced hollow fibre module features the innovation of single header design with 73 percent more membrane area than existing PURON modules. The result is a high-throughput, compact, low-operating-cost tertiary wastewater solution.

The PURON PLUS MBR packaged system features state-of-the-art MBR technology in a skid-mounted packaged plant that provides customers with a full scope of supply, from pre-screening and biological treatment through the final membrane clarification step. The pre-engineered MBR plants are available with capacities ranging from 15,000 to 200,000 GPD and offer a reduced footprint, flexible layout, and a design optimised to meet most environmental discharge regulations.

KMS is also showcasing its new modular PURON MBR systems that are designed for capacities ranging from 0.2 to 2 MGD and offer a low-cost, flexible, pre-engineered MBR system. KMS supports each system with process and design expertise for fast installation and start-up.

About this page

This page was last updated on 11 March 2018


Information on this page may have been supplied by third parties. You are reminded to contact any third parties to confirm information is accurate, up to date and complete before acting upon it. accepts no liability for information provided by third parties, actions taken on the basis of this information or information held on third-party websites.