BIO-CEL® supplier page

MICRODYN-NADIR's BIO-CEL L MBR membrane module
Supplied by: MICRODYN-NADIR
Flat Sheet (FS) MBR membrane configuration | Polymeric membrane material

Module product series:

  • BIO-CEL XS
  • BIO-CEL 52
  • BIO-CEL 104
  • BIO-CEL 208 | BIO-CEL 416
  • BIO-CEL L | BIO-CEL XL
Visit the MICRODYN-NADIR website

About BIO-CEL®

BIO-CEL® combines the benefits of traditional hollow fibre and plate and frame configurations without any of their inherent disadvantages. The self-supporting membrane sheet is 2 mm thick, resulting in an extremely high packing density and very low specific energy consumption.

The BIO-CEL® configuration centres on flat sheet technology, with directional flow eliminating clogging and reducing downtime. The modules open top and bottom channels reliably prevent the deposition of sludge and fibre accumulation during the continuous crossflow operating process. The self-supporting structure of the membrane module enables frame-free installation, thus eliminating blockages around the external boundaries of each component.

Visit the MICRODYN-NADIR website
Flat Sheet (FS) MBR membrane configuration
Polymeric membrane material | PES
Pore size: 0.04 µm

Module product series:

  • BIO-CEL XS
  • BIO-CEL 52
  • BIO-CEL 104
  • BIO-CEL 208 | BIO-CEL 416
  • BIO-CEL L | BIO-CEL XL

Company summary

Visit the MICRODYN-NADIR website
Head office in Wiesbaden, Germany
Operates in Africa, Americas, Asia, Europe and Middle East | Operates worldwide in every continent

Last updated: 19 July 2019

Disclaimer:

Information on this page has been supplied by third parties. You are reminded to contact the third party concerned to confirm information is accurate, up to date and complete before acting upon it.