Your web browser is out of date.

Update your browser for better security, speed and to get the best experience on this website.

Update your browser
Advert

Mui Wo sewage treatment worksview Toray

Logo Toray large
Location: Lantau Island, Hong Kong
Supplied by: Toray Industries, Inc.

Application:

Municipal

MBR technology/system:

MEMBRAY™

Flat Sheet (FS) MBR membrane configuration | Immersed technology configuration
Membrane material: Polymeric
Capacity range (MLD): 1.1 - 10.0
Visit the Toray MBR website

About Mui Wo sewage treatment works

Mui Wo is a rural town located in Lantau Island, Hong Kong, with one of its main attractions being Silver Mine Bay and Beach. Rises in population and tourism to this region have resulted in an increased volume of sewage and the need to upgrade the existing wastewater treatment system.

Mui Wo Sewage Treatment Works (MWSTW) was commissioned in 1985 to treat sewage water via conventional secondary treatment consisting of screening and degritting facilities, an oxidation ditch, and ultraviolet (UV) disinfection. With a capacity of 1,190 cubic meters per day, MWSTW treats wastewater from Mui Wo's sewerage network, septic waste collected by private contractors and the Food and Environmental Hygiene Department, and sludge from other Drainage and Services Department (DSD) treatment works.

The plant would not have extra capacity to treat the increasing volume of wastewater, increasing the risk of poor effluent quality that would contaminate nearby beaches. Hong Kong's Special Administrative Region (SAR) government took action to expand the existing wastewater treatment plant. The goal would be to provide public sewerage services to Mui Wo and surrounding villages and protect the water quality of Silver Mine Bay.

PROJECT DETAILS
The aim of the project was to replace the existing oxidation ditch with a membrane bioreactor (MBR) system, which would significantly reduce the system footprint while producing higher quality effluent. The MBR system would use Toray's MEMBRAY™ flat-sheet MBR technology for the final design.

The MBR system is designed to handle a peak flow of 0.086 cubic meters per second. The system incorporates pre-treatment using a 3-millimeter punch-hole drum screen (2 duty, 1 standby), four MBR trains (3 duty, 1 standby), and ancillary equipment. Each of the trains has an anoxic and aeration tank that houses the MBR modules.

View case study on company website

Company summary

Visit the Toray MBR website
Head office in Tokyo, Japan
Operates in Worldwide
commissioned plants Total installed capacity of 790,000 m3/day

About this page

This page was last updated on 05 August 2020

Disclaimer

Information on this page may have been supplied by third parties. You are reminded to contact any third parties to confirm information is accurate, up to date and complete before acting upon it. TheMBRSite.com accepts no liability for information provided by third parties, actions taken on the basis of this information or information held on third-party websites.