Qatar University research team develops new approach to test clogging in membrane bioreactors

13 November 2017


news_nov_2017_qu_team_develop_new_approach_to_test_clogging_fig_1

The MBR team at Qatar University

A research team from the Gas Processing Center (GPC) at Qatar University College of Engineering (QU-CENG), with external collaborators from Public Works Authority Qatar (Ashghal) and Qatargas have developed a method for testing clogging of membrane bioreactors.

The team includes GPC Environmental Engineering Chair Prof Simon Judd, GPC Post-doctorate Researcher Dr Pompilia Buzatu and CENG Department of Chemical Engineering Co-Principal Investigator Prof Hazim Qiblawey.

Themed ‘Membrane bioreactor technology: a new approach for improved process robustness’, the work has been conducted as part of the National Priorities Research Program (NPRP) project.

The team studied municipal and industrial wastewater sludge samples from plants at Lusail and Ras Laffan. They used a bespoke test cell designed to allow direct viewing of the membrane channel for clogged solids. Sludge from existing operating MBRs has been introduced into the cell and their clogging behaviour has been observed directly. The image of the clogged membrane channel was then translated to a number indicating the extent of the clogging.

The study revealed that both ways in which the membrane clogs the channels and the amount of clogging produced depends on the source of the sludge and the process operating conditions. Remedial measures to avoid problems with membrane permeability recovery have been recommended.

Prof Simon Judd said: ‘MBRs are considered the technology of choice for advanced biological treatment of wastewater where space is limited and/or where treated water of high quality such as for irrigation is required. A technical challenge is the loss of membrane permeability, or the reduction of flow through the membrane. This is conventionally attributed to membrane surface fouling – a very well-studied topic – by dissolved organic material in the mixed liquor (or sludge) providing the biological treatment. This is one of only a handful of studies which have quantified clogging, and the only one to use direct observation as the method.’

news_nov_2017_qu_team_develop_new_approach_to_test_clogging_fig_2

The MBR plant at Qatar University

‘The MBR Site’ is a trading division of Judd and Judd Ltd, a company registered in England and Wales, registered number 8082403.

Registered office: Suite 2, Douglas House, 32-34 Simpson Road, Fenny Stratford, Buckinghamshire, MK1 1BA, United Kingdom. Email: info@thembrsite.com

Banner image: full treatment plant for pharmaceutical wastewater in Taizhou, Linhai Park, Zhejiang Province, China, including Shanghai MEGAVISION  flat sheet UF membrane modules in two MBR units. Image courtesy of VALORSABIO, Lda.

Image credits:

– Image for our Chinese largest plants 全球最大的MBR项目 homepage link: Image supplied by Apex Environmental
– Image for our Consultants and Contractors homepage link: Image supplied by Ovivo USA, LLC.

Disclaimer: The information given on this website is reproduced in good faith. No liability is accepted for errors or omissions. The MBR Site does not endorse any products, services, organisations, events or any other listing included in this site. You are strongly advised to check all information, including specifications and installation details, before acting on any information given in this website. The MBR Site links to third-party websites – note that we are not responsible for the content of third-party websites and third-party websites are visited at your own risk. Please read our terms and conditions and privacy policy. Use of this website indicates acceptance of these conditions.

This website is designed for modern browsers – if you have problems viewing our website, you may wish to upgrade your browser.