Have you got the energy?

31 July 2011

Simon Judd

Simon Judd

Author Bio

Simon Judd, author of The MBR Book, Watermaths, and Industrial MBRs, offers observations on membrane technology. Contact Simon at simon@juddwater.com.

High operational costs, and energy costs in particular, are seen as being the Achilles heel of MBRs. There is naturally a great emphasis on energy efficiency and, given that most of the energy demand from operating MBRs relates to blowing air, aeration energy efficiency has attracted the most attention.

For biotreatment the aeration demand is dependent on the loading of biodegradable organics. Increasing aeration energy efficiency is therefore achieved through increasing oxygen transfer at the lowest energy demand possible. This has led to the exploration and development of high shear aeration devices to generate small air bubbles with enhanced mixing.

For air scouring of the membrane in immersed MBRs the object is also to create shear, but at the membrane surface itself. This is generally achieved with coarse bubble aerators generating relatively large bubbles which scour the membrane surface directly (as for flat sheet systems) and/or cause lateral movement of the membrane (as in the case of hollow fibres).

So, how much air is actually needed? The low end for the specific energy demand for membrane scouring is now at around 0.1 kWh/m3 permeate for some existing optimised installations (like Brescia and Olu Pandan). It appears now that this figure may be revised downwards with more recent developments in intense intermittent scouring, combined with improvements in membrane module design. Sludge pumping and permeate extraction will always add at least another 0.1 kWh/m3 (at least, for HF systems), but the total of ~0.2 kWh/m3 is impressively frugal.

In fact, there’s now talk of MBRs being lower in carbon footprint than conventional activated sludge processes – even without the polishing step to create parity of treated effluent quality. There are still challenges with the technology, but maybe the energy penalty one is abating.

‘The MBR Site’ is a trading division of Judd and Judd Ltd, a company registered in England and Wales, registered number 8082403.

Registered office: Suite 2, Douglas House, 32-34 Simpson Road, Fenny Stratford, Buckinghamshire, MK1 1BA, United Kingdom. Email: info@thembrsite.com

Banner image: full treatment plant for pharmaceutical wastewater in Taizhou, Linhai Park, Zhejiang Province, China, including Shanghai MEGAVISION  flat sheet UF membrane modules in two MBR units. Image courtesy of VALORSABIO, Lda.

Image credits:

– Image for our Chinese largest plants 全球最大的MBR项目 homepage link: Image supplied by Apex Environmental
– Image for our Consultants and Contractors homepage link: Image supplied by Ovivo USA, LLC.

Disclaimer: The information given on this website is reproduced in good faith. No liability is accepted for errors or omissions. The MBR Site does not endorse any products, services, organisations, events or any other listing included in this site. You are strongly advised to check all information, including specifications and installation details, before acting on any information given in this website. The MBR Site links to third-party websites – note that we are not responsible for the content of third-party websites and third-party websites are visited at your own risk. Please read our terms and conditions and privacy policy. Use of this website indicates acceptance of these conditions.

This website is designed for modern browsers – if you have problems viewing our website, you may wish to upgrade your browser.